Slide 1
Carefully cut out the two sheets from the sheet. The outline of the ears can be cut with a craft knife by an adult.
Slide 1a
Ensure that the outline cut extends to the ends of these lines
Slide 2
Fold the two side flaps of the head upwards (use a ruler to get a nice straight edge).
Slide 2a
Fold Lines
Slide 3
Initially fold the white area at the top of the head (with the DYT logo) upwards….
Slide 4
…. then fold it backwards along with the small tabs at the top of the head and those around the chin.
Slide 5
Apply paper glue to the area shown. Fold the back of the mask to line up with the glued area…..
Slide 6
…make sure the tabs at the top of the head are tucked inside – there is no need to glue/stick these tabs. Tape can be applied to the back of the head to hold these parts in place whilst the glue dries.
Slide 7
Apply paper glue to the two tabs each side of the chin and fold them inside the head…..
Slide 8
…..the bottom tab goes on the outside at the back of the head and is taped down.
Slide 9
Finally, stick the collar to the back of the head in the position indicated on the back of the head and tape down.
Slides 10 and 11
The finished Pharaoh Head!
